Nodes configuration

A single node must be configured as the server station on each Casso channel if it is necessary to serve more than one client must be configured as many channels as are the clients.

Node Data (primary and backup)

Set of attributes associated with the node (channel), referring to its address and other attributes presented below:
Figure 6 - Channel Data
In case of communication via Tcp-Ip:
IP address - Unused.
Port - Not used
For both TCP-IP and Serial:
SlaveID -Address of slave station, defined by this channel.
IgnoreBitOnLine - If "enabled" indicates that the driver should ignore the indication of "BitOnLine" that is inserted by the IED when failure or normality occurs at a point, according to the IED criterion.
WaitForIdleToCmd - If "enabled" indicates that a command will only be sent when the sampling communication is at rest, that is, it is not occurring.
Tag for Comm status - In this field, the name of an existing tag in the project can be indicated to receive indication of success/failure in communication, from a functional point of view. The module waits for a maximum of Timeout (=8000ms) receipt of a customer's request. In case of failure the value of this tag will be placed at ZERO. In the event of success the value will be placed in UM.