Driver Simulator
For a generic explanation of the Device Module, channels, nodes, and point configuration, see the reference guide.
Supium
Name of the communication driver: TSimulator - Random SCADA Values
Current version: 1.0.0.0
Implementation DLL: T.ProtocolDriver.TSimulator.dll
Channel Setup
Protocol options: not used in this driver
Node configuration: not used in this driver
Point Setting
The syntax for TSimulator communication points is: <Type>: <Min>; <Max>
Where Type: Represents the type of simulation:
BOOL;
INTEGER;
FLOAT;
TEXTSTRING;
RAMP;
SINE;
For the STRING simulation type, stringlength can be configured in the Modifiers column.
Example of point configuration
TagName | Node | Address | Datatype | AccessType | Modifiers |
Sine | SimulatorNode | SINE:-50;50 | Native | Read | |
MyRamp | SimulatorNode | RAMP:0;100 | Native | Read | |
MyString | SimulatorNode | STRING: | Native | Read | StringLength=5 |
MyBool | SimulatorNode | BOOL: | Native | Read | |
Myint | SimulatorNode | INTEGER:0;10 | Native | Read | |
MyFloat | SimulatorNode | FLOAT:-500;-100 | Native | Read |
Troubleshoot
The execution state of the driver can be observed through the diagnostic tools, which are:
Tracking window
Property Watch
Module Information
A status value of 0 (zero) means that communication was a success. Negative values indicate an internal driver error and positive values mean that there are protocol errors.
| Panel | ||||||||
|---|---|---|---|---|---|---|---|---|
On this page:
|